WEIGHING FEATURES

• For hydraulic circuits up to 4,000 PSI / 280 BAR
• Resolution: from 5 kg
• Accuracy: ±0.5% to ±5% of capacity, min. ±20 kg*

WHY CHOOSE LTP DINI ARGEO

• Easy to install, connects to the hydraulic system via a tee fitting.
• It does not reduce the load capacity of the forklift and does not affect the original manufacturer's certification.
• It is indestructible because it is not subject to shock.
• Direct power from the truck's battery makes the system always ready to weigh when you need it.
• The weight indicator is compact and comes with a bracket for easy in-cab installation.
• Thanks to the LTP Tool PC program, which can be downloaded free of charge from the download area, it is possible to optimize the weighing performance of the system.
• The optional printer allows you to trace the weighs made.

COMPACT WEIGHT INDICATOR

• Specific digital weight indicator for weighing through hydraulic pressure sensor.
• ABS case with 25 mm backlit LCD display with 6 high contrast digits and icons for showing the active functions.
• Functional waterproof keypad with 5 keys.
• Date and time board provided as standard.
• Direct power supply from the forklift (voltage at choice, depending on the battery of the forklift).

HYDRAULIC PRESSURE SENSOR

• 6 m shielded connection cable, with removable waterproof connector.
• Protection sheath, specific for contact with oils and lubricants.
• Nickel-plated steel structure.
• IP65 protection rating.
• Hydraulic connector: 1/4" BSP parallel.
• Temperature of use: -10° / +50° C

LTP TOOL SOFTWARE

Configuration of the LTP kit is easily carried out through the programming menu of the weight indicator. In addition, when additional optimization or system analysis is required, you can download LTP TOOL, the free PC program that improves the response speed and accuracy of the weighing system according to the conditions and characteristics of the forklift.

MINIMUM REQUIREMENTS*

• Operating System: Windows 10
• Processor: 1.6 Ghz
• Ram: 4 Gb
• Free hard disk space: 250 Mb
  (*) Compatible with LTP-1 version only.

POWER SUPPLY UNIT OF CHOICE

Depending on the voltage present on the forklift, it is possible to choose the most suitable optional ALxxV5 power supply unit, with input from 18 to 72Vdc or from 40 to 160Vdc. The ALxxV5 power supply units can be installed inside the weight indicator (by ordering the S1 service) and can simultaneously power the OBTPRLT printer, optimising the wiring of the various components.